Differences

This shows you the differences between two versions of the page.

--- code:work:lvisf:2017upgrade1:start [2017/06/02 14:45] – [Ground Station] david
+++ code:work:lvisf:2017upgrade1:start [2017/06/06 14:28] (current) – [Hardware Upgrades] david
@@ Line 43: / Line 43: @@
 ===== GUI / System Tweaks =====
-  * Add system off button that shuts down everything (closes out everything gracefully)
+  * <del>Add system off button that shuts down everything (closes out everything gracefully)</del>
   * Digitizer calibration buttons (short and long)
-  * Digitizer temperatures are not being displayed
+  * <del>Digitizer temperatures are not being displayed</del>
   * Display channel threshold above each channel on the waveform screen since it could be changing with Ed mod.
   * Display waveform delta between even / odd sample mean on each channel (watch for temperature drift in ADC calibration)
@@ Line 76: / Line 76: @@
     * Replaced under chassis three fans with higher CFM versions of the fans we have 2017.05.19
     * Re-routed cables to open up inlet under chassis 2017.05.23 (verified ambient steady state operations in the lab show 58C primary ADC temperature which is probably 10 degrees cooler than before)  (box not assembled, this is only with back panel installed)
-    * More fans are on order to replace on the top of the computer
+    * <del>More fans are on order to replace on the top of the computer</del>
+    * Fans have arrived and will be wired and installed this week (week of June 05, probably Thursday)
   * <del>Improve drive copying speed from external **ext2** data partition</del> 2017.06.01
     * Will try ext2 reading with windows computer next
@@ Line 131: / Line 132: @@
   * GUI show shots, filename percentage missed, etc...
   * <del>Add a laser shutdown that stops data collection and then turns off the laser (keeps triggers going)</del> - Dave Y. did this a while back, works great, but Dan needs to add controls
-  * Javad stopping and Applanix stopping
+  * <del>Javad stopping and Applanix stopping</del> - Dan wrote this in Python and it appears to work well!
     * How to download everything
   * Log all status packets and applanix raw data
@@ Line 139: / Line 140: @@
   * <del>password free login from GUI to backend</del> 2015.05.25 done using [[http://www.firedaemon.com/blog/passwordless-root-ssh-public-key-authentication-on-centos-6|this link]]
   * <del>Send ADC temperatures to GUI as a status packet</del>  - Dave Y. 2017.05.24  All 5 temps for both digitizer are sending over, Dan needs to get new packet
-  * Send only primary Applanix packets to Dan, not everything we see (filter out by IP source)
+  * <del>Send only primary Applanix packets to Dan, not everything we see (filter out by IP source)</del> - Dave Y. looks at the IP address and only sends the one on the instrument to GUI.
   * Send swath characterization to Dan for real time map geolocation
+      * Dave Y. and Dan C. got the communications working, need to fill with meaningful information
     * Dan needs galv value vs time for the edges and middle position
     * Packet should be shot return list or something to that effect
   * Startup as a single script, can we get there?  I think so with launched "screens" and a bash script
-  * Post flight script to download the flight Javad and Applanix data.
+  * <del>Post flight script to download the flight Javad and Applanix data.</del> - 2017.06.05 Dave R. works well at the moment, probably some corner cases where it might not...
     * Multi-thread to download all the javad data at once?  Why not... the javads are the limit, not drive and network
   * Record raw Applanix packets to disk (maybe just the primary bench mounted Applanix for now)
-  * Record CPU temperature (this looks to be as easy as reading a system file:) <code>
+  * <del>Record CPU temperature (this looks to be as easy as reading a system file:)</del> - Dave Y. Fixed last week. <code>
 [lvis@lvisf ~]$ cat /sys/class/thermal/thermal_zone*/temp # shows all the cores