Differences

This shows you the differences between two versions of the page.

--- code:work:lvisf:2024:field_processing:start [2024/05/26 17:36] – david
+++ code:work:lvisf:2024:field_processing:start [2024/05/31 13:36] (current) – david
@@ Line 1: / Line 1: @@
+====== Field Processing ======
+  * [[code:work:lvisf:2024:field_processing:arcsix:start|ARCSIX Field Processing]]
 ====== Loaner Mac setup ======
 === ESD ===
@@ Line 103: / Line 107: @@
 grid_res    10
 imu        610i
+</code>
+<code>
+geolocation_only
+obs_bias                 -208.232 0
+time_tag_bias_roll_to_obs  -0.0007 0
+time_tag_bias_pitch_to_obs -0.0016 0
+roll_pitch_alignment_z    90.0000000000000000 0.0
+scan_angle_roll_scale      -1.007488 0
+scan_angle_pitch_scale      1 0
+instrument_roll_bias        1.735 0
+instrument_pitch_bias       0.354 0
+instrument_yaw_bias         0.10442 0
+fiber_speed_factor 1.0
+use_channel_a
+use_channel_b
+use_channel_c
+use_range_frrx
+measurements_per_batch 30000
+disable_gphyscorr_all
+timeseries_pad       10.0000000000000000
+####
+sourcedir   /mnt/archive/mjd
+demdir      /home/lvis/field_test_data/dlr_90mdem/DEM
+aircraft    P3_NASA426
+suffix      .dat
+smoothwidth 2.5
+threshold   3.0
+elev_cpt    /home/lvis/field_tools/local/elev_ice.cpt
+height_cpt  /home/lvis/field_tools/local/rh100.cpt
+energy_cpt  /home/lvis/field_tools/local/energy.cpt
+dem_cut     150.0
+energy_cut  1000.0
+grid_res    10
+imu         610i
 </code>
@@ Line 108: / Line 153: @@
 <code>
 cd ~
-mkdir -p proc/lvisf/60083
+mkdir -p proc/lvisf/60454
-cd proc/lvisf/60083
+cd proc/lvisf/60454
 </code>
 Run the script:
 <code>
-~/field_tools/local/rtp_local_proc.sh ~/field_tools/local/config_610i.cfg 60083
+time ~/field_tools/local/rtp_local_proc.sh ~/field_tools/local/config_610i_arcsix2024.cfg 60460
 </code>
 If you need to clean the directory to rerun with new parameters:
 <code>
-:45
 ~/field_tools/local/clean.sh all
 </code>