Differences

This shows you the differences between two versions of the page.

--- code:work:lvisf:nonrt2017:start [2018/01/04 19:08] – [Installing Boost Library] david
+++ code:work:lvisf:nonrt2017:start [2018/01/04 22:54] (current) – [Auto-load Plx9030 Driver] david
@@ Line 523: / Line 523: @@
 </code>
   - Build the drivers <code>
+# to disable IRQs in this driver, just use this code where the IRQ calls are commented out
+cp init.c.no_irq init.c
 make
 </code>
-  - Load the drivers <code>
+  - Load the drivers (this crashes when i load the bio1753 (IRQ!!! issue) <code>
 cd /home/lvis/src/MIC3753/linux_driver_source_3.2.7.0_64bit/drivers/bin
 insmod biokernbase.ko
@@ Line 610: / Line 612: @@
   - symlink the drivers into the kernel directory <code>
-sudo ln -s /opt/lvisf/src/MIC3753/linux_driver_source_3.2.7.0_64bit/drivers/bin/*.ko /lib/modules/2.6.33.9-rt31.79.el6rt.x86_64/kernel/drivers/misc/
+sudo ln -s /opt/lvisf/src/MIC3753/linux_driver_source_3.2.7.0_64bit/drivers/bin/*.ko /lib/modules/2.6.32-431.el6.x86_64/kernel/drivers/misc/
 </code>
   - add to our startup script **/etc/sysconfig/modules/lvisf.modules**
@@ Line 630: / Line 632: @@
   - symlink the driver into the kernel so it will come up on boot <code>
-sudo ln -s /opt/lvisf/src/PLX/PlxSdk/Driver/Source.Plx9000/Output/Plx9030.ko /lib/modules/2.6.33.9-rt31.79.el6rt.x86_64/kernel/drivers/misc/</code>
+sudo ln -s /opt/lvisf/src/PLX/PlxSdk/Driver/Source.Plx9000/Output/Plx9030.ko /lib/modules/2.6.32-431.el6.x86_64/kernel/drivers/misc/</code>
   - add to our startup script **/etc/sysconfig/modules/lvisf.modules**
     - modify the file <code>
@@ Line 652: / Line 654: @@
 ===== Installing Boost Library =====
-The **boost** C++ library is required for the data system.  The tarball of the 1.6.2 version is in the repository.
+The **boost** C++ library is required for the data system.  The tarball of the 1.6.2 version is in the repository.  Or download the latest from [[http://www.boost.org/users/download/]].  Here is the latest as of 2018.01.04 [[https://dl.bintray.com/boostorg/release/1.66.0/source/boost_1_66_0.tar.bz2]]
   - Uncompress the tar into **/opt** <code>
@@ Line 671: / Line 673: @@
 # Add the boost root directory
 export BOOST_ROOT=/opt/boost
+</code>
+    - Run our profile to load this variable <code>
+source /home/lvis/.bash_profile
 </code>
   - Compile the **boost** libraries <code>