Differences

This shows you the differences between two versions of the page.

--- computers:server:sage_config [2008/11/13 02:38] – david
+++ computers:server:sage_config [2010/02/18 17:10] (current) – david
@@ Line 11: / Line 11: @@
 ====== Automatic Processes ======
-===== Daily Scripts =====
+===== Hourly Scripts =====
+These are put into **/etc/cron.daily/**:
 ==== Check NFS Mounts ====
@@ Line 32: / Line 34: @@
 </code>
-===== Set Clock Hourly =====
+==== Set Clock Hourly ====
 Set our clock hourly to nist's time server:  **/etc/cron.hourly/set_clock_via_network.sh**
@@ Line 41: / Line 43: @@
 </code>
-===== Raid Monitoring =====
+===== Monitoring Daemons =====
+==== Power Disruption ====
+See the [[#apcupsd]] entry for what I did to monitor ups and power monitoring.
+==== Raid Monitoring ====
 Using **mdadm**, I have the following running from **/etc/rc.d/rc.local**:
@@ Line 49: / Line 57: @@
 ====== Daemon Configurations ======
+===== apcupsd =====
+  - Download from the website the **apcupsd-3.14.4-1.el5.x86_64.rpm
+** package and install it:  <code>
+cd /root/down
+yum localinstall apcupsd-3.14.4-1.el5.x86_64.rpm
+</code>
+  - Checked over the defaults, and they look perfect to me.  The other machines in the house will use this daemon to signal whether they should turn off or not.
+**NOTE:** I pulled the plug on this to test if they all at least saw the power going down.  Now that I think about it, archon is going to need to go down first, so I'll need to modify the battery time left on the slave so it goes first.
+Test run by pulling the plug (I saw this same message on both slaves (archon and mythtv):
+  Thu Nov 13 07:21:22 EST 2008  Power failure.
+  Thu Nov 13 07:21:28 EST 2008  Running on UPS batteries.
+  Thu Nov 13 07:23:15 EST 2008  Mains returned. No longer on UPS batteries.
+  Thu Nov 13 07:23:15 EST 2008  Power is back. UPS running on mains.
 ===== dhcpd =====
@@ Line 115: / Line 141: @@
   - Manually started it normally:  <code>
 service dhcpd start
+</code>
+===== dovecot =====
+  * Modified **/etc/dovecot.conf** so that only:  <code>
+protocols = imaps
+ssl_listen = *:993
+</code>
+  * Generate our self signed certificate:
+    - Move the original one  <code>
+mv /etc/pki/dovecot/certs/dovecot.pem /etc/pki/dovecot/certs/dovecot.pem.orig
+mv /etc/pki/dovecot/private/dovecot.pem /etc/pki/dovecot/private/dovecot.pem.orig
+</code>
+    - Edit our configuration here: <code>
+jed /etc/pki/dovecot/dovecot-openssl.cnf
+</code>
+    - Generate a new one: <code>
+/usr/share/doc/dovecot-1.0.7/examples/mkcert.sh
+</code>
+    - Restart the imap service:  <code>
+service dovecot restart
 </code>
@@ Line 474: / Line 521: @@
+===== gallery =====
+I wanted to install the newest Gallery BETA software to store photos and videos online.  I'm migrating this to sage as this is the faster, better machine at the moment (until Slackware 13 arrives and the big re-install on archon...)  This needed a more recent PHP, so I followed some instructions online to install a "testing" version of CentOS 5.
+  * Page where I found HOWTO: [[http://www.freshblurbs.com/install-php-5-2-centos-5-2-using-yum]]
+  * Photo Repository:
+==== Update PHP ====
+  - Added the "testing" repository to sage by editing **** and putting this in it:  <code>
+[c5-testing]
+name=CentOS-5 Testing
+baseurl=http://dev.centos.org/centos/5/testing/$basearch/
+enabled=0
+gpgcheck=1
+gpgkey=http://dev.centos.org/centos/RPM-GPG-KEY-CentOS-testing
+</code>
+  - Update just PHP by enabling the repository temporarily:  <code>
+yum --enablerepo=c5-testing update php
+</code>
+  - Restart the webserver once PHP is installed:  <code>
+service httpd restart
+</code>
+==== Gallery 3 Beta 2 Install ====
+  - Download the .zip file
+  - I made a virtual host to:  [[http://gallery.rabine.org]]
+    - Modified the named configuration files and added **gallery.rabine.org**
+    - Added **/etc/httpd/conf/sage_virtual_hosts.conf** and configured the remote named virtual host
+  - Created a directory on the raid to store all the data
+  - Had to disable SELinux (probably a rule I could have used to allow it... but I'm being lazy) for apache to see the raid drive directory!?  See this link [[http://forums.devshed.com/apache-development-15/documentroot-does-not-exist-when-it-does-526847.html]]
 ===== gcc =====