2016/07/28 13:50

• Booted the CERN SL Kernel 2.6.33.9-rt31.79.el6rt.x86_64 dev system
• Plugged the USB device into the CPU directly
• Kernel recognized the device as:

  usb 2-1.7: new full speed USB device using ehci_hcd and address 3
  usb 2-1.7: New USB device found, idVendor=09db, idProduct=00bc
  usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  usb 2-1.7: Product: USB-TEMP-AI
  usb 2-1.7: Manufacturer: MCC
  usb 2-1.7: SerialNumber: 00107479
  generic-usb 0003:09DB:00BC.0003: hiddev96,hidraw2: USB HID v1.01 Device [MCC USB-TEMP-AI] on usb-0000:00:1d.0-1.7/input0

For generic programming, we are going to want to use the UL library.

Looking in this FTP site for code: ftp://lx10.tx.ncsu.edu/pub/Linux/drivers/USB/

Requires libusb, found an online page suggesting check this:

rpm -qa | grep -i libusb
libusb1-1.0.9-0.6.rc1.el6.x86_64
libusb-0.1.12-23.el6.x86_64

1. Installed these packages

   sudo yum install libusb-devel libudev-devel libusb1 libusb1-devel 

2. Grabbed this

   mkdir ~/code
   cd ~/code
   git clone git://github.com/signal11/hidapi.git

3. Compile and install

   cd ~/code/hidapi/
   ./bootstrap
   ./configure
   make
   sudo make install

4. Install the udev rules for the system
   1. Now located in the MCCLinuxDrivers directory
      1. Download the rules from their site <code> cd /tmp wget https://raw.githubusercontent.com/wjasper/Linux_Drivers/master/60-mcc.rules wget https://raw.githubusercontent.com/wjasper/Linux_Drivers/master/61-mcc.rules </code>
   2. Copy the files into the udev configuration

      sudo cp ~/src/MCCLinuxDrivers/6*-mcc.rules /etc/udev/rules.d/
      sudo chmod 644 /etc/udev/rules.d/6*-mcc.rules
      sudo chown root:root /etc/udev/rules.d/6*-mcc.rules

   3. Restart udev

      sudo /sbin/udevadm control --reload
      sudo /sbin/udevadm control --reload-rules

1. Download code <code> cd ~/code git clone https://github.com/wjasper/Linux_Drivers.git </code>
2. Build and install

   cd ~/src/MCCLinuxDrivers/USB/mcc-libusb
   make
   sudo make install
   sudo ldconfig

3. Had to add /usr/local/lib to an ldconfig script
   1. Modify /etc/ld.so.conf.d/lvisf.conf

      sudo nano /etc/ld.so.conf.d/lvisf.conf

   2. Append this line to the file if it isn't already there into /etc/ld.so.conf.d/lvisf.conf

      /usr/local/lib

   3. It looks like this for me now — David Lloyd Rabine 2016/07/28 15:07

      /home/lvis/src/spectrum/shared/linux/pc64/lib
      /home/lvis/src/MIC3753/linux_driver_source_3.2.7.0_64bit/libs
      /opt/lvisf/src/lvisF/build/lib/msgService
      /opt/lvisf/src/lvisF/build/lib/shmem
      /usr/local/lib

4. Now run ldconfig to get the library to be in our path

   sudo ldconfig

1. To where the code is installed at the moment

   cd /home/lvis/src/MCCLinuxDrivers/USB/mcc-libusb

2. Run the test program

   ./test-usb-temp-ai

3. Appears to work!

   [lvis@lvisf-centos65 mcc-libusb]$ ./test-usb-temp-ai
   USB TEMP-AI is found.
   
   USB-TEMP-AI Testing
   ----------------
   Hit 'b' to blink LED
   Hit 'c' to calibrate
   Hit 'd' to test DIO
   Hit 'e' to exit
   Hit 'f' for burnout status
   Hit 'g' to get serial number
   Hit 'i' for information
   Hit 'R' to reset
   Hit 'r' to measure temperature (RTD)
   Hit 'p' read the CJC
   Hit 's' to get status
   Hit 'S' to measure temperature (Semiconductor)
   Hit 't' to measure temperature (Thermocouple)
   Hit 'T' to measure temperature (Thermistor)
   Hit 'x' to measure temperature (Thermocouple) multiple channels
   g
   Serial Number = 00107479
   p
   CJC 0 = 29.86 degress Celsius or 85.75 degrees Fahrenheit.
   r
   Sampling RTD
   Enter channel number [0-7]: 0
           1.  2-wire with 1 sensor.
           2.  2-wire with 2 sensors.
           3.  3-wire. 
           4.  4-wire.
   Enter connector type [1-4]: 
   4
   Connection-type = 4 wire.
   R0 = 0.000000     A = 1.000000e+00     B = 0.000000e+00     C = 0.000000e+00
   Channel: 0  -9999.00 degrees Celsius or -17966.20 degrees Fahrenheit.
   Channel: 0  -9999.00 degrees Celsius or -17966.20 degrees Fahrenheit.
   Channel: 0  -9999.00 degrees Celsius or -17966.20 degrees Fahrenheit.
   Channel: 0  -9999.00 degrees Celsius or -17966.20 degrees Fahrenheit.